Pipe-HRZ Series
Pipe - Sheet Pile Combined Wall System
A Pipe Pile Combination Wall System consists of Steel Pipe Piles that withstand most of the loading and paired Infill HRZ Sheet Piles that transmit pressure loads to the Pipe Piles. Pipe Piles can range in sizing utilising LSAW, SSAW and ERW Pipes. The Pipe Piles serve two purposes from a structural standpoint, the first being as a retaining member that resists horizontal hydrostatic and earth pressures. The second purpose is to act as a bearing pile, resisting vertical loads. Pipe Pile Combination Walls are generally utilised when a standard series of sheet piles do not have the strength to resist the required design loads. Integration with Tie Back Systems and other anchorages is simple and ESC can offer the full configuration as part of its piling solution package.
Frequently infill sheet piles are not required to be the same length as the king pipe piles – typically between 60 to 100% of the pipe pile length.
Presented are a small selection of combined pipe-HRZ options. With variables such as sheet pile profile, pipe diameter, pipe thickness, pipe length to sheet pile length ratio there are well over 3,000 potential combinations. You may proceed to the ESC Pipe Pile Combined Wall calculator to design your own combined wall section. Alternatively, you may consult our engineering team at engineering@escpile.com for any technical queries.
Sheet Pile Steel Grades
-
ASTM A572 Gr 50 & 60
-
BS EN 10248 S355GP, S430GP
Pipe Pile Steel Grades
-
BS EN 10025-2 S275JR, S275J2, S355JR
-
GB/T Q235B, Q275B, Q345B, Q390B, Q420B, MDB350
-
ASTM A572 Gr42, Gr 50, Gr 60
-
ISO 3183 Gr B, X42, X46, X52, X56, X60, X65, X70
-
API 5L L245 L290, L320, L360, L390, L415, L450, L485
Length
Pipe Piles up to 100 metres length
Sheet Piles up to 34 metres length
Options
-
Internal & External Shear Keys
-
Marine Rubber Fender connection flanges
-
Pipe Pile Shoe
-
Tie Rod Connectors
-
Painted Markings
-
Corrosion protection coatings
Product Images
Options
Project Case Studies